Length
Specifications
Compare modelsNTD 7,874
Inc. VAT
The Bürkle Sampler Tubus is a robust and efficient sampling instrument designed for collecting free-flowing bulk materials up to approximately 10 mm in diameter. Constructed from high-quality V4A (AISI 316 / 1.4404) stainless steel, it offers superior durability and corrosion resistance. Its practical design and special tip geometry make it ideal for sampling materials such as hazelnuts, grains, tea blends, and similar coarse products from large sacks. The simple hand-operated mechanism allows precise control during sampling while preventing contamination.
Note: Lock seal close-it and close-it food & pharma should be ordered separately.
The Bürkle Tubus Sampler is an essential tool for laboratories, food manufacturers, and quality control environments requiring precise, contamination-free sampling of coarse and free-flowing bulk materials.
Control seals for sampling close-it
Control seals close-it tape, rolls
NTD 7,874
Inc. VAT
Manufacturer P/N
5382-0040
Part Number
6.200 394
Manufacturer
Burkle
Length
40 cm
Manufacturer P/N
5382-0080
Part Number
6.204 492
Manufacturer
Burkle
Length
80 cm
It is a robust and efficient sampling instrument designed for collecting free-flowing bulk materials up to approximately 10 mm in diameter. Constructed from high-quality V4A (AISI 316 / 1.4404) stainless steel, it offers superior durability and corrosion resistance. Its practical design and special tip geometry make it ideal for sampling materials such as hazelnuts, grains, tea blends, and similar coarse products from large sacks. The simple hand-operated mechanism allows precise control during sampling while preventing contamination.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 7,874
Inc. VAT
