Connection
Connection size inlet
Connection size outlet
UNSPSC
Specifications
Compare modelsNTD 4,407
Inc. VAT
The Ball valve for barrel ½" is described as follows: Suitable for solidifying media. Individually adaptable, through various accessories.
Use the listed model, dimensions and supplied specifications to select the appropriate product for your laboratory workflow. Verify any application-specific requirements and accessory compatibility before purchase.
This listing is for Ball valve for barrel ½". The exact model, size or configuration is identified in the product name.
Confirm the dimensions, capacity, material and model compatibility that apply to your intended use.
Suitability depends on your equipment and application. The available listing does not provide enough technical information to confirm every use case.
The supplied quantity or configuration is as stated in the product name. Other accessories should not be assumed to be included.
Tube nozzles, PP, with strong outer thread
Manufacturer P/N
0500-0112
Part Number
7.970 928
Manufacturer
Burkle
Connection
External thread
Manufacturer P/N
0500-8003
Part Number
7.300 266
Manufacturer
Burkle
Connection
Internal thread
Manufacturer P/N
0500-8002
Part Number
6.077 563
Manufacturer
Burkle
Connection
Internal thread
Manufacturer P/N
0500-8001
Part Number
6.079 668
Manufacturer
Burkle
Connection
Internal thread
Manufacturer P/N
0500-0134
Part Number
7.603 786
Manufacturer
Burkle
Connection
External thread
This listing is for Ball valve for barrel ½". The exact model, size or configuration is identified in the product name.
_0.png&w=3840&q=75)
7 mins read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
7 mins read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
9 mins read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
9 mins read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
6 mins read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
