Material grinding chamber
Material grinding tools
Specifications
Compare modelsNTD 594,788
Inc. VAT
The Retsch Cross Beater Mill SK 300 Stainless Steel is designed for preliminary and fine size reduction of medium-hard, brittle, and fibrous materials. Built for batch-wise or continuous operation, this robust mill is ideal for use in laboratories as well as under tough industrial production conditions. The SK 300 offers exceptional grinding performance and durability, with a powerful drive system and a maximum rotor speed of 4000 min⁻¹—often achieving a final fineness of less than 100 µm in a single pass.
Note: please order separately.
The Retsch Cross Beater Mill SK 300 Stainless Steel Bottom sieves and base frame must be ordered separately. Additional sieve and feeder sizes are available upon request.
Accessories for rotor beater mills SR 300 and cross beater mills SK 300
NTD 594,788
Inc. VAT
Manufacturer P/N
207510002
Part Number
6.268 112
Manufacturer
Retsch
Material grinding chamber
Steel, hardened
NTD 510,954
Inc. VAT
Manufacturer P/N
207510001
Part Number
6.268 113
Manufacturer
Retsch
Material grinding chamber
Cast iron
NTD 594,788
Inc. VAT
Manufacturer P/N
207510003
Part Number
6.268 114
Manufacturer
Retsch
Material grinding chamber
Steel, stainless
NTD 510,954
Inc. VAT
Manufacturer P/N
207510004
Part Number
4.676 373
Manufacturer
Retsch
Material grinding chamber
Cast iron
It is designed for preliminary and fine size reduction of medium-hard, brittle, and fibrous materials. Built for batch-wise or continuous operation, this robust mill is ideal for use in laboratories as well as under tough industrial production conditions. The SK 300 offers exceptional grinding performance and durability, with a powerful drive system and a maximum rotor speed of 4000 min⁻¹, often achieving a final fineness of less than 100 µm in a single pass.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 594,788
Inc. VAT
