Depth int.
Ext. dim. (WxDxH)
Ext. depth
Ext. width
Int. Dim. (WxDxH)
Int. width
Nominal capacity
Temperature
Type
Weight
Specifications
Compare modelsNTD 500,623
Inc. VAT
The ESCO CelCulture CO₂ Incubator CCL-240B-8-NF is a 240-liter capacity incubator designed for precise CO₂ control in laboratory environments. Equipped with an infrared (IR) CO₂ sensor and a stainless steel chamber, it ensures accurate gas monitoring and a contamination-resistant interior. The incubator operates without a ULPA filter, making it suitable for applications where such filtration is not required.
This incubator is ideal for laboratories requiring reliable CO₂ control without the need for ULPA filtration, offering a balance between performance and cost-effectiveness.
NTD 500,623
Inc. VAT
Manufacturer P/N
2170069
Part Number
6.287 242
Manufacturer
Esco
Depth int.
620 mm
NTD 362,284
Inc. VAT
Manufacturer P/N
2170068
Part Number
6.287 240
Manufacturer
Esco
Depth int.
530 mm
It is a 240-liter capacity incubator designed for precise CO₂ control in laboratory environments. Equipped with an infrared (IR) CO₂ sensor and a stainless steel chamber, it ensures accurate gas monitoring and a contamination-resistant interior. The incubator operates without a ULPA filter, making it suitable for applications where such filtration is not required.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 500,623
Inc. VAT
