Max. no. of sample positions
Type
Specifications
Compare modelsNTD 113,778
Inc. VAT
The Behr Serial Heating Unit EXR 6 is designed for efficient hydrolysis and crude fibre analysis, accommodating up to six samples simultaneously. Each heating position is individually adjustable, allowing precise control over the heating process. The unit includes a cooling water distribution system with a condenser rack and hoses, as well as 600 ml beakers equipped with cold fingers for effective sample cooling.
This unit offers a comprehensive solution for laboratories requiring efficient and controlled heating for sample analysis.
NTD 113,778
Inc. VAT
Manufacturer P/N
B00218448
Part Number
9.843 827
Manufacturer
Behr Labor-Technik
Max. no. of sample positions
6
NTD 89,180
Inc. VAT
Manufacturer P/N
B00218446
Part Number
9.843 828
Manufacturer
Behr Labor-Technik
Max. no. of sample positions
4
Manufacturer P/N
B00218430
Part Number
9.043 032
Manufacturer
Behr Labor-Technik
Max. no. of sample positions
1
_0.png&w=3840&q=75)
7 mins read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
7 mins read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
9 mins read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
9 mins read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
6 mins read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
