Depth int.
Ext. dim. (WxDxH)
Ext. depth
Ext. height
Ext. width
Heating capacity
Height int.
Int. Dim. (WxDxH)
Int. width
Nominal capacity
Plug type
Type
Ultrasonic power
Weight
Specifications
Compare modelsNTD 194,181
Inc. VAT
The Bandelin RM 16.2 UH Ultrasonic Bath, UK Plug is an ultrasonic bath from Bandelin designed for ultrasonic cleaning, degassing, and laboratory sample preparation. The inclination of the trough bottom results in different internal heights. Its documented configuration includes connection: UK Plug, and tank design: The inclination of the trough bottom results in different internal heights.
The Bandelin RM 16.2 UH Ultrasonic Bath, UK Plug supports ultrasonic cleaning, degassing, and laboratory sample preparation where the stated configuration is required. Confirm electrical supply, included accessories, and installation requirements before ordering.
Baskets for Sonorex Technik ultrasonic baths
Manufacturer P/N
8204-GB
Part Number
4.720 280
Manufacturer
Bandelin
Depth int.
275 mm
Manufacturer P/N
8204
Part Number
9.877 576
Manufacturer
Bandelin
Depth int.
275 mm
Manufacturer P/N
8214
Part Number
9.877 580
Manufacturer
Bandelin
Depth int.
300 mm
Manufacturer P/N
8208
Part Number
9.877 569
Manufacturer
Bandelin
Depth int.
500 mm
Manufacturer P/N
8208-CH
Part Number
4.720 285
Manufacturer
Bandelin
Depth int.
500 mm
Manufacturer P/N
8204-CH
Part Number
4.720 279
Manufacturer
Bandelin
Depth int.
275 mm
Manufacturer P/N
8214-GB
Part Number
4.720 289
Manufacturer
Bandelin
Depth int.
300 mm
Manufacturer P/N
8214-CH
Part Number
4.720 288
Manufacturer
Bandelin
Depth int.
300 mm
Ultrasonic baths SONOREX TECHNIK, with ultrasound and heating, even trough bottom
It is an ultrasonic bath from Bandelin designed for ultrasonic cleaning, degassing, and laboratory sample preparation. The inclination of the trough bottom results in different internal heights.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 194,181
Inc. VAT
