Accuracy
Standard
Type
Specifications
Compare modelsNTD 220,476
Inc. VAT
The Anton Paar DMA 35 EX Petrol Portable Density Meter is a high-precision handheld instrument engineered for density, relative density, and concentration measurements in hazardous zones. Certified under ATEX standards, it is tailored for use in fuel, petrochemical, and industrial environments. Featuring a borosilicate glass oscillator and viscosity correction, it offers traceable, one-handed operation with gesture control and a robust, field-ready design. On-site measurements enable fast decisions, even in highly viscous samples, with automatic recognition of results outside tolerance limits.
Scope of Supply:
Ideal for petrochemical and fuel industries, the Anton Paar DMA 35 EX Petrol delivers safe, reliable, and portable density testing in demanding conditions.
Manufacturer P/N
183057
Part Number
6.313 805
Manufacturer
Anton Paar
Standard
ISO 15212-1, IP 559, ASTM D7777
Manufacturer P/N
183056
Part Number
6.313 804
Manufacturer
Anton Paar
Standard
ISO 15212-1
NTD 184,537
Inc. VAT
Manufacturer P/N
172244
Part Number
6.313 803
Manufacturer
Anton Paar
Standard
ISO 15212-1
Manufacturer P/N
226130
Part Number
4.691 913
Manufacturer
Anton Paar
Standard
ISO 15212-1
It is a high-precision handheld instrument engineered for density, relative density, and concentration measurements in hazardous zones. Certified under ATEX standards, it is tailored for use in fuel, petrochemical, and industrial environments. Featuring a borosilicate glass oscillator and viscosity correction, it offers traceable, one-handed operation with gesture control and a robust, field-ready design. On-site measurements enable fast decisions, even in highly viscous samples, with automatic recognition of results outside tolerance limits.
_0.png&w=3840&q=75)
7 mins read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
7 mins read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
9 mins read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
9 mins read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
6 mins read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 220,476
Inc. VAT
