Plug type
Specifications
Compare modelsNTD 298,604
Inc. VAT
The Vacuubrand MV 10 NT is a high-performance, four-stage diaphragm pump designed for continuous, oil-free evacuation and pumping of non-corrosive gases. Operating at 230 V and 50/60 Hz, this pump delivers a maximum pumping speed of 10.4 m³/h and achieves an ultimate vacuum of 0.5 mbar. Equipped with a CEE mains cable, it is suitable for European power systems.
The Vacuubrand MV 10 NT diaphragm pump offers reliable, quiet, and oil-free vacuum performance, making it an excellent choice for various laboratory applications.
It is a high-performance, four-stage diaphragm pump designed for continuous, oil-free evacuation and pumping of non-corrosive gases. Operating at 230 V and 50/60 Hz, this pump delivers a maximum pumping speed of 10.4 m³/h and achieves an ultimate vacuum of 0.5 mbar. Equipped with a CEE mains cable, it is suitable for European power systems.
Yes. It is designed for Vacuum ovens, filtration processes, backing pump for turbomolecular drag pumps, analytical instruments, and offers a voltage of 230 V, 50/60 Hz and a maximum pumping speed of 10.4 m³/h to support this kind of work.
It has a voltage of 230 V, 50/60 Hz, a maximum pumping speed of 10.4 m³/h and an ultimate vacuum of 0.5 mbar.
It offers diaphragm pump, four-stage operation for efficient vacuum generation, CEE mains cable for compatibility with European systems and whisper-quiet operation.
Sealing kit NT for chemistry diaphragm pumps NT
NTD 298,604
Inc. VAT
Manufacturer P/N
20744000
Part Number
9.880 954
Manufacturer
VACUUBRAND
Plug type
EU
NTD 298,604
Inc. VAT
Manufacturer P/N
20744003
Part Number
4.670 568
Manufacturer
VACUUBRAND
Plug type
US
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 298,604
Inc. VAT
