NTD 27,271
Inc. VAT
NTD 49,954
NTD 35,470
Inc. VAT
NTD 58,081
NTD 33,339
Inc. VAT
NTD 54,650
NTD 80,584
Inc. VAT
NTD 129,599
NTD 80,584
Inc. VAT
NTD 129,599
NTD 80,584
Inc. VAT
NTD 129,599
NTD 4,262
Inc. VAT
NTD 6,213
NTD 579,365
Inc. VAT
NTD 829,965
NTD 38,504
Inc. VAT
NTD 50,712
NTD 353,723
Inc. VAT
NTD 461,325
NTD 353,723
Inc. VAT
NTD 438,605
NTD 353,723
Inc. VAT
NTD 438,605
NTD 41,538
Inc. VAT
NTD 51,182
NTD 41,538
Inc. VAT
NTD 51,182
NTD 15,170
Inc. VAT
NTD 18,674
NTD 35,000
Inc. VAT
NTD 43,127
NTD 21,889
Inc. VAT
NTD 26,946
NTD 15,170
Inc. VAT
NTD 18,674
Showing 705 - 736 of 2035 results
NTD 2,420
Inc. VAT
NTD 9,644
Inc. VAT
NTD 2,492
Inc. VAT
NTD 198,804
Inc. VAT
NTD 39,660
Inc. VAT
NTD 39,660
Inc. VAT
NTD 4,443
Inc. VAT
NTD 4,732
Inc. VAT
NTD 5,237
Inc. VAT
NTD 4,985
Inc. VAT
NTD 4,876
Inc. VAT
NTD 136,642
Inc. VAT
NTD 145,564
NTD 180,347
Inc. VAT
NTD 192,158
NTD 136,642
Inc. VAT
NTD 145,780
NTD 180,347
Inc. VAT
NTD 192,303
NTD 136,642
Inc. VAT
NTD 145,744
NTD 226,761
Inc. VAT
NTD 241,607
NTD 226,761
Inc. VAT
NTD 241,787
NTD 226,761
Inc. VAT
NTD 241,823
NTD 180,347
Inc. VAT
NTD 192,339
NTD 20,299
Inc. VAT
NTD 21,636
NTD 59,417
Inc. VAT
NTD 63,282
NTD 59,417
Inc. VAT
NTD 63,282
NTD 9,572
Inc. VAT
NTD 10,294
Inc. VAT
NTD 10,294
Inc. VAT
NTD 10,294
Inc. VAT
NTD 10,655
Inc. VAT
Frequently asked questions
An overhead stirrer is necessary for high-viscosity liquids or large volumes where a magnetic stir bar would lose "coupling." They offer more power and allow for different impeller shapes to suit specific mixing patterns. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.
The choice depends on the desired flow: propeller impellers create axial flow for general mixing, while anchor or paddle impellers are better for high-viscosity fluids or preventing sedimentation at the bottom of the vessel. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
While most vortex mixers are designed for short "touch" bursts to quickly mix small tubes, many of the professional models feature a "continuous" mode for use with plate or tube-rack attachments for longer mixing periods. Laboratories should compare speed or shaking range, vessel geometry, and temperature control and document the selected setup for consistent use.
Digital models allow for precise temperature and speed settings, often featuring feedback control via external sensors. This ensures that your sample stays at the exact temperature required, which is critical for sensitive chemical reactions. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
For cell culture, an orbital shaker with gentle motion and low CO2/humidity resistance is often required. These are designed to be placed inside incubators to provide continuous aeration and nutrient distribution without damaging cells. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.