NTD 27,271
Inc. VAT
NTD 49,954
NTD 35,470
Inc. VAT
NTD 58,081
NTD 33,339
Inc. VAT
NTD 54,650
NTD 80,584
Inc. VAT
NTD 129,599
NTD 80,584
Inc. VAT
NTD 129,599
NTD 80,584
Inc. VAT
NTD 129,599
NTD 4,262
Inc. VAT
NTD 6,213
NTD 579,365
Inc. VAT
NTD 829,965
NTD 38,504
Inc. VAT
NTD 50,712
NTD 353,723
Inc. VAT
NTD 461,325
NTD 353,723
Inc. VAT
NTD 438,605
NTD 353,723
Inc. VAT
NTD 438,605
NTD 24,778
Inc. VAT
NTD 30,521
NTD 41,538
Inc. VAT
NTD 51,182
NTD 8,235
Inc. VAT
NTD 10,150
NTD 20,119
Inc. VAT
NTD 24,778
NTD 12,823
Inc. VAT
NTD 15,784
NTD 24,778
Inc. VAT
NTD 30,521
Showing 2017 - 2048 of 2282 results
NTD 57,792
Inc. VAT
NTD 69,964
NTD 59,923
Inc. VAT
NTD 72,565
NTD 12,786
Inc. VAT
NTD 12,786
Inc. VAT
NTD 2,998
Inc. VAT
NTD 2,998
Inc. VAT
NTD 5,743
Inc. VAT
NTD 2,998
Inc. VAT
NTD 42,802
Inc. VAT
NTD 51,796
NTD 42,802
Inc. VAT
NTD 51,796
NTD 44,933
Inc. VAT
NTD 54,397
NTD 39,226
Inc. VAT
NTD 17,879
Inc. VAT
NTD 13,039
Inc. VAT
NTD 10,403
Inc. VAT
NTD 44,175
Inc. VAT
NTD 49,304
Inc. VAT
NTD 70,037
Inc. VAT
NTD 73,649
NTD 7,838
Inc. VAT
NTD 8,235
NTD 11,306
Inc. VAT
NTD 11,883
NTD 38,685
Inc. VAT
NTD 40,671
NTD 80,584
Inc. VAT
NTD 129,599
NTD 80,584
Inc. VAT
NTD 129,599
NTD 5,526
Inc. VAT
NTD 5,779
NTD 3,504
Inc. VAT
NTD 3,612
NTD 3,504
Inc. VAT
NTD 3,612
NTD 3,504
Inc. VAT
NTD 3,612
NTD 3,504
Inc. VAT
NTD 3,612
NTD 2,709
Inc. VAT
NTD 2,781
NTD 4,659
Inc. VAT
NTD 4,840
Frequently asked questions
An overhead stirrer is necessary for high-viscosity liquids or large volumes where a magnetic stir bar would lose "coupling." They offer more power and allow for different impeller shapes to suit specific mixing patterns. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.
The choice depends on the desired flow: propeller impellers create axial flow for general mixing, while anchor or paddle impellers are better for high-viscosity fluids or preventing sedimentation at the bottom of the vessel. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
While most vortex mixers are designed for short "touch" bursts to quickly mix small tubes, many of the professional models feature a "continuous" mode for use with plate or tube-rack attachments for longer mixing periods. Laboratories should compare speed or shaking range, vessel geometry, and temperature control and document the selected setup for consistent use.
Digital models allow for precise temperature and speed settings, often featuring feedback control via external sensors. This ensures that your sample stays at the exact temperature required, which is critical for sensitive chemical reactions. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
For cell culture, an orbital shaker with gentle motion and low CO2/humidity resistance is often required. These are designed to be placed inside incubators to provide continuous aeration and nutrient distribution without damaging cells. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.