Colour
Specifications
Compare modelsAlternative in-stock items
NTD 433
Inc. VAT
The Deutsch & Neumann Nutsch Funnel GUKO Set comprises 5 red rubber cones (GUKOs) designed to securely fit various funnel sizes into suction flasks. Manufactured from natural rubber (NR) with a hardness of 40 Shore A, these conical adapters ensure a tight seal, enhancing the efficiency of filtration processes in laboratory settings.
This GUKO set is essential for laboratories requiring reliable and efficient filtration setups. The varying sizes accommodate a range of funnel diameters, providing versatility and ensuring a secure fit for optimal performance.
The Deutsch & Neumann Nutsch Funnel GUKO Set comprises 5 red rubber cones (GUKOs) designed to securely fit various funnel sizes into suction flasks. Manufactured from natural rubber (NR) with a hardness of 40 Shore A, these conical adapters ensure a tight seal, enhancing the efficiency of filtration processes in laboratory settings.
Yes. It is designed for securely fitting funnels into suction flasks during filtration processes, and offers set includes of 5 pieces (Sizes 1–5) and an outer diameter range of 21–53 mm to support this kind of work.
It has set includes of 5 pieces (Sizes 1–5), an outer diameter range of 21–53 mm and a hardness of 40 Shore A.
It is made from natural Rubber (NR). It also offers red.
NTD 433
Inc. VAT
Manufacturer P/N
2010152
Part Number
6.078 144
Manufacturer
Deutsch & Neumann
Colour
Red
Manufacturer P/N
2010181
Part Number
9.052 400
Manufacturer
Deutsch & Neumann
Colour
Grey
NTD 361
Inc. VAT
Manufacturer P/N
2010151
Part Number
6.077 882
Manufacturer
Deutsch & Neumann
Colour
Grey
NTD 1,047
Inc. VAT
Manufacturer P/N
2010182
Part Number
6.077 415
Manufacturer
Deutsch & Neumann
Colour
Red
NTD 650
Inc. VAT
Manufacturer P/N
2010171
Part Number
6.077 417
Manufacturer
Deutsch & Neumann
Colour
Grey
NTD 795
Inc. VAT
Manufacturer P/N
2010172
Part Number
6.078 145
Manufacturer
Deutsch & Neumann
Colour
Red
Rubber Spacers (GuKo), natural rubber
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 433
Inc. VAT
