Cleaning & Sterilisation

The Laboratory Cleaning & Sterilisation Equipment category covers the tools, instruments and consumables used to remove contamination from labware, instruments and work surfaces, and to render them safe for reuse or free of all microbial life. It is the backbone of good laboratory practice, because contamination that is not properly controlled can invalidate results, damage sensitive instruments and put staff at risk.

The category is built around three linked processes. Cleaning removes visible soil and residue, and always comes first, since trapped soil shields microorganisms from any later treatment. Disinfection then reduces viable microorganisms to a safe level, without necessarily destroying resistant bacterial spores. Sterilisation goes furthest, eliminating all microbial life including spores, and is reserved for applications where complete asepsis is essential, such as media preparation and instrument reprocessing.

In practice these stages run in sequence: manual or ultrasonic pre-cleaning, followed by automated washing and thermal disinfection or by steam sterilisation, then drying and protected storage. Matching each stage to the material being processed, and to your throughput, is what keeps the workflow both effective and safe.

Our Laboratory Cleaning & Sterilisation Equipment range

Our collection features everything needed to build a complete decontamination workflow, grouped into four core sub-categories:

Laboratory Cleaning Implements

Our Laboratory Cleaning Implements cover the manual tools that do the essential first-stage work before disinfection or sterilisation. The range includes shaped Laboratory Cleaning Brushes for Glassware for test tubes, flasks and narrow-neck vessels, low-lint Laboratory Dry Wipes for Cleaning, wipe rolls, paper towels, absorbent materials and Laboratory Draining Racks for organised drying. Effective manual cleaning removes the visible soil that would otherwise shield microorganisms and compromise later stages.

Laboratory Ultrasonic Cleaners

Our Laboratory Ultrasonic Cleaners use high-frequency cavitation to lift contaminants from joints, threads, narrow channels and intricate geometries that manual scrubbing cannot reach. The range spans compact Laboratory Benchtop Ultrasonic Cleaners through to larger units, with heated options and tank sizes to suit everything from small batches of glassware to high-throughput cleaning. Ultrasonic cleaning prepares items thoroughly, but note that it does not sterilise on its own.

Laboratory Autoclaves & Steam Sterilisers

Steam sterilisation under pressure is the benchmark method for heat- and moisture-stable loads such as glassware, media, reusable instruments and biohazard waste. Our Laboratory Autoclaves & Steam Sterilisers cover benchtop, front-loading and vertical formats with programmable cycles, supported by Laboratory Autoclave Accessories and Laboratory Autoclave Bags & Sterilisation Pouches for load handling, monitoring and post-cycle storage.

Laboratory Glassware Washers & Disinfectors

Automated Laboratory Glassware Washers & Disinfectors deliver reproducible cleaning and thermal disinfection at volume. Programmable cycles, stainless steel chambers and documented results reduce manual handling and cross-contamination risk, which is why they are standard in pathology, microbiology and pharmaceutical glasswashing where consistency and traceability matter.

Featured brands

LabFriend carries the makers laboratories trust for decontamination. For ultrasonic cleaning, Elma, Bandelin and Branson offer benchtop and industrial baths with the frequency control and cavitation performance labs rely on. Miele supplies programmable washer-disinfectors and glasswashers for high-throughput cleaning, while SHP Steriltechnik covers autoclaves and steam sterilisers. BODE Chemie provides surface and instrument disinfection, and Kimberly-Clark brings the widely used KIMWIPES, KIMTECH and WypAll wipe ranges.

Why choose LabFriend for Laboratory Cleaning & Sterilisation Equipment

At LabFriend, we are committed to helping your lab stay clean, compliant and running without interruption. Our knowledgeable team is always ready to help you match the right cleaning implements, ultrasonic cleaner, autoclave or washer-disinfector to the materials you process, your throughput and your budget. As a 100% online store we pass on competitive pricing with transparent lead times, and we back every order with fast, reliable shipping across Australia so your supplies arrive promptly and your workflow keeps moving.

Explore our extensive range of laboratory cleaning and sterilisation equipment and source the whole decontamination workflow, from pre-cleaning tools to validated steam sterilisation, in one place. Whether you are equipping a new facility, replacing a single unit or restocking everyday consumables, our products are chosen to meet the high standards of research, clinical, pharmaceutical and food-testing laboratories and to support consistent, contamination-free results. Just add items to your cart and select Instant Quote.