Representative Image

Mettler-Toledo Conductivity Measuring Cell InLab 742 ISM 2-pol Steel Cell Bole, Length 120 mm 1.8m Cable LTW Plug

Cable length

Type

Specifications

Compare models
HS Code #
90278930
Cable length
1.8 m
Cell constant
0.105 1/cm
Shaft length
120 mm
Material shaft
Stainless steel
Max. temperature
100 °C
Min. temperature
0 °C
Shaft Ø
12 mm
Temperature
0 ... 100 °C
Temperature sensor
NTC 30 kOhm
Type
InLab ® 742-ISM

Alternative in-stock items

NTD 40,816

Inc. VAT

Available soon

Product description

The Mettler-Toledo InLab 742 ISM Conductivity Measuring Cell, 2-Pole Steel Cell, 120 mm Shaft, 1.8 m Cable, LTW Plug is a conductivity sensor for analytical measurement with compatible laboratory instrumentation. The documented temperature range is 0 to 100 °C. Key dimensions include 120 mm shaft length. The documented connection is LTW plug for secure meter connection.

Key Features:

  • Brand: Mettler-Toledo
  • Type: 2-pole conductivity measuring cell
  • Connector: LTW plug for secure meter connection
  • Cable Length: 1.8 m
  • Cell Type: 2-pole steel cell for robust and accurate conductivity readings
  • Shaft Length: 120 mm
  • ISM Technology: Intelligent Sensor Management for easy calibration and sensor data storage
  • Temperature Range: 0 to 100 °C

This sensor is best selected by matching its measurement range, sample-contact design and connector to the intended meter and application.

Downloads

Compare similar models

Conductivity measuring cell InLab® 742-ISM 2-pol, steel-cell, bole length 120 mm, 1,8m-cable, LTW-plug

Manufacturer P/N

51344116

Part Number

9.041 522

Manufacturer

Mettler-Toledo

Cable length

1.8 m

Conductivitz sensor InLab® 741-ISM 2-Pol-cell, ATC

Manufacturer P/N

30014094

Part Number

9.041 442

Manufacturer

Mettler-Toledo

Cable length

1.2 m

Frequently asked questions

It is a conductivity sensor for analytical measurement with compatible laboratory instrumentation. The documented temperature range is 0 to 100 °C. Key dimensions include 120 mm shaft length. The documented connection is LTW plug for secure meter connection.

Insights

Explore
Cleaning Lab Glassware: Removing Stubborn Residue

7 mins read

Cleaning Lab Glassware: Removing Stubborn Residue

Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.

Read full story
How to Calibrate Your Pipettes to ISO 8655 Standards

7 mins read

How to Calibrate Your Pipettes to ISO 8655 Standards

Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.

Read full story
Molarity and Dilution Calculator

9 mins read

Molarity and Dilution Calculator

A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.

Read full story
Buffer Preparation Calculator

9 mins read

Buffer Preparation Calculator

Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.

Read full story