Kern & Sohn Electric Force Gauge, Maximum 100 N, d=0.02 N

The Kern & Sohn Electric Force Gauge, Maximum 100 N, d=0.02 N, Subject To Labeling UN 3481 is designed for tensile and compressive force measurement with an integrated measuring cell. When an external measuring channel is used, the internal load cell is deactivated while an external load cell is connected, supporting use with 4-wire and 6-wire sensors with strain gauges.

Key Features:

• Brand: Kern & Sohn
• Product Type: Electric force gauge
• Maximum Measuring Range: 100 N
• Readability: d=0.02 N
• Labeling: Subject to labeling UN 3481
• Measurement Type: Tensile and compressive force measurement
• Measuring Cell: Integrated measuring cell with external measuring channel capability
• Sensor Compatibility: Suitable for 4-wire and 6-wire sensors with strain gauges
• Display: 3.5" touchscreen
• Channels: Simultaneous measurement on up to four channels
• Adjustment: Two-point adjustment with weights or numerical adjustment possible
• Sensor Data: External sensor data is stored directly in the connector
• Interface: USB interface for programming, data transfer, and power supply
• Memory: Integrated SD card memory
• Functions: Tolerance function, TRACK function, and peak value measurement
• Power Supply: Rechargeable battery operation
• Compatibility: Can be mounted on all SAUTER test stands
• Scope Of Supply: Force gauge, system case, plug-in power supply, and USB cable type C

This Kern & Sohn electric force gauge is suitable for laboratories and quality control settings requiring accurate multi-channel tensile and compressive force measurement.

Frequently Asked Questions

1. What is the Kern & Sohn Electric Force Gauge, Maximum 100 N, d=0.02 N used for?

It is designed for tensile and compressive force measurement with an integrated measuring cell. When an external measuring channel is used, the internal load cell is deactivated while an external load cell is connected, supporting use with 4-wire and 6-wire sensors with strain gauges.

2. Is this product suitable for tensile and compressive force measurement with an integrated measuring cell?

Yes. It is designed for tensile and compressive force measurement with an integrated measuring cell, and offers a maximum measuring range of 100 N and a display of 3.5" touchscreen to support this kind of work.

3. What maximum measuring range and display does this product have?

It has a maximum measuring range of 100 N, a display of 3.5" touchscreen and 3,5" touchscreen.

4. What is this product compatible with?

It is compatible with can be mounted on all SAUTER test stands. It also offers d=0.02 N and subject to labeling UN 3481.