Depth int.
Ext. dim. (WxDxH)
Ext. depth
Ext. width
Int. Dim. (WxDxH)
Int. width
Nominal capacity
Rated capacity
Temperature
Type
Weight
Specifications
Compare modelsNTD 380,669
Inc. VAT
The ESCO CelCulture CCL-170B-8-HHS CO₂ Incubator is a 170L capacity incubator designed for precise control of CO₂ levels, making it ideal for cell culture applications requiring strict environmental conditions. Equipped with an infrared (IR) CO₂ sensor, it ensures accurate monitoring and control of gas concentrations. The incubator features a ULPA filtration system with an internal blower to maintain a clean environment and includes a 180°C high heat sterilization cycle for effective decontamination. The chamber is constructed from stainless steel and is coated with Isocide™ antimicrobial coating to prevent microbial growth.
This incubator is suitable for applications in cell culture, microbiology, and other laboratory research requiring controlled environmental conditions.
NTD 380,669
Inc. VAT
Manufacturer P/N
2170295
Part Number
4.678 084
Manufacturer
Esco
Depth int.
535 mm
NTD 526,016
Inc. VAT
Manufacturer P/N
2170270
Part Number
4.678 085
Manufacturer
Esco
Depth int.
640 mm
It is a 170L capacity incubator designed for precise control of CO₂ levels, making it ideal for cell culture applications requiring strict environmental conditions. Equipped with an infrared (IR) CO₂ sensor, it ensures accurate monitoring and control of gas concentrations. The incubator features a ULPA filtration system with an internal blower to maintain a clean environment and includes a 180°C high heat sterilization cycle for effective decontamination. The chamber is constructed from stainless steel and is coated with Isocide™ antimicrobial coating to prevent microbial growth.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 380,669
Inc. VAT
