Length sensor
Sensor (ØxL)
Type
Specifications
Compare modelsNTD 252,045
Inc. VAT
The Ebro 3K Temperature And Pressure Logger EBI 12-TP453 is designed for validation, monitoring, and documentation workflows in laboratory, pharmaceutical, food, and process environments. It supports reliable measurement handling and traceable workflows where consistent monitoring is required.
This Ebro solution is suitable for users who need dependable pressure and temperature data logger performance for validation, temperature monitoring, and controlled process checks.
It is designed for validation, monitoring, and documentation workflows in laboratory, pharmaceutical, food, and process environments. It supports reliable measurement handling and traceable workflows where consistent monitoring is required.
Yes. It is designed for Process validation, sterilisation monitoring, pasteurisation monitoring, and temperature mapping, and offers 3 channels to support this kind of work.
It has 3 channels.
It offers pressure and temperature.
Manufacturer P/N
1340-6647
Part Number
4.684 608
Manufacturer
Ebro
Length sensor
1200 mm
NTD 273,212
Inc. VAT
Manufacturer P/N
1340-6643
Part Number
6.495 935
Manufacturer
Ebro
Length sensor
600 mm
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 252,045
Inc. VAT
