New
Representative Image

ASPURE ESD Sheets 1210LGN light green, 1000mm x 10m, pack of 1 roll

Brand:AS ONE

Colour

Width

Specifications

Compare models
HS Code #
39269097
Colour
Light green
Length
10000 mm
Material
Nitrile
Thickness
2 mm
UNSPSC
41122301
Width
1000 mm
Available soon

Product description

For installation to work tables, protection shelves and mats that require anti-static measures. Electrostatic charges as high as 20000 volts can be reduce to safe level in a matter of seconds.
  • Front: Nitril rubber, static electricity diffusion
  • Back: Nitril rubber, conductive
  • Resistant to oils, greases, and generic solvents
  • Surface resistance front: 108-9 Ω
  • Surface resistance back: 104-5 Ω

Compare similar models

ASPURE ESD Sheets 1210LGN light green, 1000mm x 10m, pack of 1 roll

Manufacturer P/N

1-4255-21

Part Number

6.292 206

Manufacturer

AS ONE

Colour

Light green

ASPURE ESD Sheet II (Conductive Mat) 600 mm grey, 600 mm x 10 m x 2 mm pack of 1 roll
Available soon
As One Aspure ESD Sheet II Conductive Mat 600mm Grey

NTD 26,079

Inc. VAT

Manufacturer P/N

4-6088-02

Part Number

6.524 455

Manufacturer

AS ONE

Colour

Grey

ASPURE ESD Sheet II (Conductive Mat) 1000 mm grey, 1000 mm x 10 m x 2 mm pack of 1 roll
Available soon
AS ONE ASPURE ESD Sheet II (Conductive Mat), 1000 mm Gray

NTD 37,384

Inc. VAT

Manufacturer P/N

4-6088-08

Part Number

6.495 511

Manufacturer

AS ONE

Colour

Grey

Insights

Explore
Cleaning Lab Glassware: Removing Stubborn Residue

7 mins read

Cleaning Lab Glassware: Removing Stubborn Residue

Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.

Read full story
How to Calibrate Your Pipettes to ISO 8655 Standards

7 mins read

How to Calibrate Your Pipettes to ISO 8655 Standards

Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.

Read full story
Molarity and Dilution Calculator

9 mins read

Molarity and Dilution Calculator

A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.

Read full story
Buffer Preparation Calculator

9 mins read

Buffer Preparation Calculator

Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.

Read full story