Specifications
SG $368.75
Inc. VAT
The Testo Online Data Logger 160 T With Integrated Temperature Sensor is designed for automated temperature monitoring using an internal temperature sensor. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection, where data loggers can be configured, limit value alarms can be set, and measurement data can be viewed and analysed.
Note: To operate the online data logger in the testo Saveris Cloud, a valid Data Monitoring Licence is required and is subject to a charge.
This Testo online data logger is suitable for temperature monitoring applications requiring cloud-based data access, WLAN transmission, and integrated sensor measurement.
The 160 T is designed for automated temperature monitoring using an internal temperature sensor. This online temperature data logger format supports routine laboratory work in that application.
The main specifications of the 160 T are that the memory is 32000 measured values and the supplied items are Online temperature data logger, wall bracket, USB interface cable, 4 x AAA batteries, 2 x QR code sticker, and test protocol. These are the main selection points to compare with the requirements of the laboratory task.
Yes. The 160 T is suitable for automated temperature monitoring using an internal temperature sensor. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement.
The 160 T uses Large display for visual inspection on site. This is the display configuration provided for routine operation and reading of results.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
SG $368.75
Inc. VAT
