Specifications
NTD 83,871
Inc. VAT
Lovibond Laboratory Floc Tester ET830, With 4 Stirring Points, 100-240V/50-60Hz, 12VDC is designed for flocculation testing and water treatment analysis in laboratory environments. With four stirring positions and 12VDC operation, this unit supports controlled sample testing for coagulation, floc formation, and settling assessments.
This Lovibond floc tester provides a practical four-position option for laboratories requiring controlled stirring and reliable sample comparison in water analysis workflows.
The ET830 is designed for flocculation testing, coagulation studies, and water treatment analysis. The stated format and features make the product suitable for routine laboratory work within that application.
The main specifications of the ET830 are that the stirring points is 4. These are the main selection points to compare with the requirements of the laboratory task.
Yes. The ET830 is suitable for flocculation testing, coagulation studies, and water treatment analysis. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement.
The ET830 has a power supply specification of 100-240V/50-60Hz, 12VDC. This should be matched with the available laboratory power setup.
The ET830 is designed for flocculation testing, coagulation studies, and water treatment analysis. The stated format and features make the product suitable for routine laboratory work within that application.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 83,871
Inc. VAT
