Specifications
NTD 7,007
Inc. GST
The LLG Aluminum Bead and Heating Block Set (Cat. No. 6263557) is designed for dry and uniform heating of laboratory samples in the uniBLOCKTHERM digital dry bath. Instead of drilled wells, it uses high‑conductivity aluminum beads to ensure even temperature distribution. The block accommodates various vessels—tubes, bottles, or microplates—and holds up to 700 mL total volume. Two built-in handles allow easy removal.
Replace messy water baths with this efficient, low‑maintenance alternative for consistent, contamination‑free heating.
It is designed for dry and uniform heating of laboratory samples in the uniBLOCKTHERM digital dry bath. Instead of drilled wells, it uses high‑conductivity aluminum beads to ensure even temperature distribution. The block accommodates various vessels, tubes, bottles, or microplates, and holds up to 700 mL total volume. Two built-in handles allow easy removal.
Yes. It is designed for dry and uniform heating of laboratory samples in the uniBLOCKTHERM digital dry bath, and offers a capacity of up to 700 mL vessel volume and approx. 1 kg aluminum beads to support this kind of work.
It has a capacity of up to 700 mL vessel volume and approx. 1 kg aluminum beads.
It is compatible with lLG‑uniBLOCKTHERM digital dry bath. It also offers heating block with 1 kg aluminum beads and uniform, dry heat, no water bath needed.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
NTD 7,007
Inc. GST
