NTD 27,271
Inc. VAT
NTD 49,954
NTD 35,470
Inc. VAT
NTD 58,081
NTD 33,339
Inc. VAT
NTD 54,650
NTD 80,584
Inc. VAT
NTD 129,599
NTD 80,584
Inc. VAT
NTD 129,599
NTD 80,584
Inc. VAT
NTD 129,599
NTD 4,262
Inc. VAT
NTD 6,213
NTD 579,365
Inc. VAT
NTD 829,965
NTD 38,504
Inc. VAT
NTD 50,712
NTD 353,723
Inc. VAT
NTD 461,325
NTD 353,723
Inc. VAT
NTD 438,605
NTD 353,723
Inc. VAT
NTD 438,605
NTD 24,778
Inc. VAT
NTD 30,521
NTD 41,538
Inc. VAT
NTD 51,182
NTD 8,235
Inc. VAT
NTD 10,150
NTD 20,119
Inc. VAT
NTD 24,778
NTD 12,823
Inc. VAT
NTD 15,784
NTD 24,778
Inc. VAT
NTD 30,521
Showing 993 - 1024 of 2300 results
NTD 91,925
Inc. VAT
NTD 118,365
Inc. VAT
NTD 35,578
Inc. VAT
NTD 10,836
Inc. VAT
NTD 11,414
NTD 10,836
Inc. VAT
NTD 11,414
NTD 10,836
Inc. VAT
NTD 11,414
NTD 10,836
Inc. VAT
NTD 11,414
NTD 117,282
Inc. VAT
NTD 3,720
Inc. VAT
NTD 3,973
NTD 1,481
Inc. VAT
NTD 1,589
NTD 3,034
Inc. VAT
NTD 3,215
NTD 2,420
Inc. VAT
NTD 2,565
NTD 2,167
Inc. VAT
NTD 2,312
NTD 3,793
Inc. VAT
NTD 9,680
Inc. VAT
NTD 4,118
Inc. VAT
NTD 4,334
NTD 2,781
Inc. VAT
NTD 2,998
NTD 17,265
Inc. VAT
NTD 7,838
Inc. VAT
NTD 7,838
Inc. VAT
NTD 40,707
Inc. VAT
NTD 222,571
Inc. VAT
NTD 5,562
Inc. VAT
NTD 5,960
NTD 22,972
Inc. VAT
NTD 24,453
NTD 1,336
Inc. VAT
NTD 1,373
Frequently asked questions
An overhead stirrer is necessary for high-viscosity liquids or large volumes where a magnetic stir bar would lose "coupling." They offer more power and allow for different impeller shapes to suit specific mixing patterns. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.
The choice depends on the desired flow: propeller impellers create axial flow for general mixing, while anchor or paddle impellers are better for high-viscosity fluids or preventing sedimentation at the bottom of the vessel. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
While most vortex mixers are designed for short "touch" bursts to quickly mix small tubes, many of the professional models feature a "continuous" mode for use with plate or tube-rack attachments for longer mixing periods. Laboratories should compare speed or shaking range, vessel geometry, and temperature control and document the selected setup for consistent use.
Digital models allow for precise temperature and speed settings, often featuring feedback control via external sensors. This ensures that your sample stays at the exact temperature required, which is critical for sensitive chemical reactions. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
For cell culture, an orbital shaker with gentle motion and low CO2/humidity resistance is often required. These are designed to be placed inside incubators to provide continuous aeration and nutrient distribution without damaging cells. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.