Representative Image

KERN Coating Thickness Gauge JCT 100 FE;NFE Internal; Max 2000 µm D=, 0.1 µm

Specifications

HS Code #
90318080
Battery/ rechargeable battery
Li Ion
Depth
65 mm
Dimensions (WxDxH)
152 x 65 x 35 mm
Electrochemical system
Li Ion
Height
35 mm
Interfaces
Bluetooth, USB 2.0
Max. measured value
2000 µm
Measured range
2,000 µm
Type of auxiliary energy
Rechargeable battery
UNSPSC
41111623

NTD 19,396

Inc. VAT

Available soon

Product description

The Kern & Sohn Coating Thickness Gauge JCT 100 Fe; nfe Internal; Max, 2000 Μm D= 0, 1 Μm is designed for electrochemical measurement and analytical testing. The coating thickness gauge determines accurately the thickness of coats of paint or varnish on iron or non-iron base material.

Key Features:

  • Brand: Kern & Sohn
  • Product Type: Coating Thickness Gauge
  • Model: JCT 100 Fe nfe Internal
  • Measurement Method: Non-destructive measuring
  • Sensor: Low-wear sensor
  • Adjustment: Single and two-point calibration
  • Measurement Modes: Single and repeated measurements
  • Display: Three-colour LED display
  • Automotive Mode: Automotive mode
  • Voice Output: Voice Transmission
  • Application: electrochemical measurement and analytical testing

This Kern & Sohn Coating Thickness Gauge is suitable for users needing reliable performance for electrochemical measurement and analytical testing.

Frequently asked questions

The JCT 100 Fe nfe Internal is designed for electrochemical measurement and analytical testing. This coating thickness gauge format supports routine laboratory work in that application.

Insights

Explore
Cleaning Lab Glassware: Removing Stubborn Residue

7 mins read

Cleaning Lab Glassware: Removing Stubborn Residue

Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.

Read full story
How to Calibrate Your Pipettes to ISO 8655 Standards

7 mins read

How to Calibrate Your Pipettes to ISO 8655 Standards

Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.

Read full story
Molarity and Dilution Calculator

9 mins read

Molarity and Dilution Calculator

A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.

Read full story
Buffer Preparation Calculator

9 mins read

Buffer Preparation Calculator

Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.

Read full story
KERN Coating Thickness Gauge JCT 100 FE;NFE Internal; Max 2000 µm D=, 0.1 µm | LabFriend Taiwan